PAGE 1 OF 9
0715 IH-2079
1-800-295-5510
uline.ca
H-2079
POLYPROPYLENE
STRAPPING MACHINE
POWER
RESET
FEED
LENGTH
2
0
3
4
5
MAX
M
ON
OFF
TECHNICAL DATA
Strapping Speed: 2.5 Seconds/Strap
Dimensions (L x W x H): 35½ x 23 x 30½"
Net Weight: 220 lbs.
Max. Tension: 100 lbs.
Strap Width: 1/4" – 5/8"
Core Capacity (Core Dia. x Width): 8 x 8", 9 x 8" or 11 x 8"
Safety Switch: Stops machine when top is lifted.
Power: 110 VAC, 50/60 Hz, Single phase.
MACHINE SETUP
POW
ER
RES
ET
FEE
D
LEN
GTH
G
N
I
P
P
A
R
T
S
E
T
U
O
R
L
E
E
R
D
A
O
L
1
2
Slide Roller
BAND GUIDE
Roller
Remove adapter
before installing
reel.
Right Side
1. Remove plastic reel from machine. It comes preset
for 9" core. Remove outer ring adapter for 8" core. For
11" strapping core, the H-959-TC075 adapter can be
purchased. (See Figure 1)
2. Load Strapping onto reel. DO NOT REMOVE BANDING UNTIL
LOADED. Make sure strap is going in correct direction
indicated by red arrow. (See Figure 1)
1. Pull slide roller bar down and thread strapping over (1)
and under (2). Thread strap through guide (Ref 10) until it
reaches top of machine. (See Figure 2)
Open lid and remove contents from tray. Install package guide on lid.
Figure 1
Figure 2
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
