PAGE 2 OF 6
0621 IH-1843
CLAMPING AND LIFTING THE DRUM
1. Raise drum grabber clamps above the drum.
Position the ends of clamps on either side of the
drum lid. Do not pass the center line of the drum.
Doing so will cause damage to the drum.
(See Figure 1)
2. Slowly lower the forks to position the drum grabber
clamps in the center of the drum, stopping just
below the raised ring. (See Figure 2)
WARNING! Do not pass the center line of the
drum. Failure to do so will cause damage to
the drum.
3. Slowly move the fork truck forward to clamp the drum
grabber clamps around the drum. (See Figure 3)
4. Lift the forks and the drum will be clamped and
lifted. Carry the drum to the desired destination.
LOWERING AND RELEASING THE DRUM
FROM THE DRUM GRABBER
5. Slowly lower the drum onto a firm surface.
6. Continue to lower the forks slowly to open the drum
grabber clamps. While lowering, slowly move the
forklift backward. (See Figure 4)
INSTRUCTIONS CONTINUED
Figure 1
Figure 2
Figure 3
Figure 4
1-800-295-5510
uline.com
