PAGE 1 OF 9
1122 IH-1783
STANDARD LIFT TABLE
1-800-295-5510
uline.com
H-1783, H-10622
SPECIFICATIONS
H-1783
H-10622
Capacity
1,760 lbs.
2,200 lbs.
Height Raised
39.5"
39.5"
Height Lowered
16.5"
15"
Table Size
39/ x 20 x 2"
40 x 20 x 2.4"
Total Height
39"
38"
Overall Length
46"
46"
Foot Pedal Cycles to Max Height
70
55
Wheel Diameter
6"
6"
Weight
267 lbs.
275 lbs.
Working Volume of Oil Cylinder
282 ml
282 ml
Oil Capacity
500 ml
500 ml
1. Read all instructions carefully before operating the
lift table.
2. DO NOT overload the lift table and always operate
it within the rated load. Overloading will cause
damage to the lift table and the operator.
3. DO NOT stand or sit on the table to work.
4. DO NOT put hands or feet under the table when
lowering.
5. Apply the brakes while loading to prevent the table
from moving.
6. The load must be distributed uniformly across the
whole table.
7. DO NOT load loose or unstable loads onto the table.
8. DO NOT leave the table loaded for extended
periods of time.
9. DO NOT move the truck while lifting.
10. The table should only be used on flat solid surfaces.
11. Make sure not to overload the table when it is in
the raised position. The safety valve only works as
the table is lifted. Overloading in the raised position
may damage the table.
12. When loading and unloading goods in the raised
position, do not drag loads across the table.
This may cause offset loading and the table may
turn over.
13. When maintaining and repairing the table, the
supporting block should be used to support the
fork arm in order to prevent table from falling. There
should not be a load on table while maintaining
and repairing the table.
TECHNICAL INFORMATION
GENERAL INFORMATION
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
