PAGE 1 OF 6
0422 IH-10048
H-10048
DOWNTOWN COLLECTION –
48" ROUND TABLE
1-800-295-5510
uline.com
PARTS
TOOLS NEEDED
NOTE: Assemble unit on a smooth, non-marring
surface to prevent scratching. Check that all
parts are included.
1. Position center leg between support legs. Slide
brackets on support legs over holes in center leg.
Attach using two M6 x 60 mm bolts and two hex
nuts. (See Figure 1)
NOTE: Do not fully tighten bolts until tabletop is
attached to frame.
Figure 1
ASSEMBLY
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Allen Wrench
(Included)
Wrench
(Included)
Adjustable Glide x 4
M6 x 60 mm Bolt x 2
M6 x 65 mm Bolt x 8
Hex Nut x 2
Center Leg
Support Leg
Two Person Assembly
Recommended
Hex Nut
M6 x 60 mm Bolt
