SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS •
MAINTENANCE
• SERVICE
USER GUIDE
u-line.com
Wine Rack Installation
To remove wine racks for cleaning:
1.
Remove any bottles stored on the rack.
2.
Grasp the end of the rack and gently slide it out
until it stops.
3.
The release levers are located on the inside of the
rack rails. Press the left rack release lever down. At
the same time, lift the matching right rack release
lever up. Pull the rack out until it is free of the
tracks and the cabinet.
NOTICE
Do not remove the track rails from the cabinet.
To insert wine racks in the cabinet:
1.
Align the left and right rack channels with the tracks
in the cabinet. Ensure an even track engagement
on both sides by gently pushing the rack into the
cabinet until it stops.
2.
Before reloading the rack, ensure proper
movement of the travel stops in the left and right
track rails by pulling the rack out gently until it
stops.
To clean wine racks:
1.
Saturate a soft cloth with a soapy, warm water
solution.
2.
Wring excess water from cloth and wipe racks
down.
NOTICE
The wine racks are greased. This white lithium
grease helps provide smooth operation of the
slide mechanism. It is important not to remove
grease.
Wine Rack Installation 1
Extended Non-Use
VACATION/HOLIDAY, PROLONGED SHUTDOWN
The following steps are recommended for periods of
extended non-use:
