NORA-W10 series - System integration manual
UBX-22005601 - R04
Regulatory compliance
Page 43 of 56
C1-Public
6.5.3
End product user manual requirement
As the MIC ID is not included on the NORA-W10 marking, the end product manufacturer must
include a copy of the NORA-W10 Japan Radio Certificate in the end product technical
documentation
.
6.6
NCC Taiwan compliance
⚠
Approvals are pending for NORA-W101 and NORA-W106.
6.6.1
Taiwan NCC Warning Statement
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設
計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干
擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信
或工業、科學及醫療用電波輻射性電機設備之干擾。應避免影響附近雷達系統之操作。
系統廠商應於平台上標示「本
產品內含射頻模組：
XXXyyyLPDzzzz-x
」字樣
Statement translation:
•
Without permission granted by the NCC, any company, enterprise, or user is not allowed to change
frequency, enhance transmitting power, or alter original characteristic as well as performance to
an approved low power radio-frequency device.
•
The low power radio-frequency devices shall not influence aircraft security and interfere legal
communications; If any interference is found or suspected, the user shall immediately cease
operating the equipment until the interference has been prevented. The said legal
communications means radio communications is operated in compliance with the
Telecommunications Act. The low power radio-frequency devices must be susceptible with the
interference from legal communications or ISM radio wave radiated devices.
6.6.2
Labeling requirements for end product
End products based on NORA-W10 series modules and targeted for distribution in Taiwan must carry
labels with the textual and graphical elements shown below.
Contains Transmitter Module
內含發射器模組
:
:
xxxxxxxyyyyyyy
Other wording can be used, but only if the meaning of original messaging remains unchanged. The
label must be physically attached to the product and made clearly visible for inspection.