JODY-W2 - System integration manual
UBX-18068879 - R14
Regulatory compliance
Page 68 of 84
C1 - Public
Channel number
Channel center frequency [MHz]
18
Allowed channels Remarks
1
–
11
2412
–
2462
Yes
12
–
13
2467
–
2472
No
36
–
48
5180
–
5240
Yes
Canada (ISED): Devices are restricted to
indoor operation only and the end product
must be labelled accordingly.
52
–
64
5260
–
5320
Yes
100
–
116
5500
–
5580
Yes
120
–
128
5600
–
5640
No
USA (FCC): Client device operation allowed
under KDB 905462
132
–
144
5660
–
5700
Yes
149
–
165
5745
–
5825
Yes
Table 33: Allowed channel usage under FCC/ISED regulation
☞
15.407 (j) Operator Filing Requirement:
Before deploying an aggregate total of more than one thousand outdoor access points within the
5.15
–
5.25 GHz band, parties must submit a letter to the Commission acknowledging that, should
harmful interference to licensed services in this band occur, they will be required to take corrective
action. Corrective actions may include reducing power, turning off devices, changing frequency
bands, and/or further reducing power radiated in the vertical direction. This material shall be
submitted to Laboratory Division, Office of Engineering and Technology, Federal Communications
Commission, 7435 Oakland Mills Road, Columbia, MD 21046. Attn: U-NII Coordination, or via Web
site at https://www.fcc.gov/labhelp with the subject line: “U
-NII-
1 Filing”.
End product labeling requirements
For an end-product using the JODY-W2, there must be a label containing, at least, the following
information:
This device contains
FCC ID: (XYZ)(UPN)
IC: (CN)-(UPN)
(XYZ) represents the FCC
“
Grantee Code
”, this
code may consist of Arabic numerals, capital letters,
or other characters, the format for this code will be specified by the Commission
’
s Office of
Engineering and Technology
19
. (CN) is the Company Number registered at ISED. (UPN) is the Unique
Product Number decided by the grant owner.
The label must be affixed on an exterior surface of the end product such that it will be visible upon
inspection in compliance with the modular labeling requirements of OET KDB 784748. The host user
manual must also contain clear instructions on how end users can find and/or access the FCC ID of
the end product.
The label on the JODY-W2 module containing the original FCC ID acquired by u-blox can be replaced
with a new label stating the end-product
’s FCC/ISED
ID in compliance with the modular labeling
requirements of OET KDB 784748.
FCC end product labeling
The outside of final products containing the JODY-W2 module must display in a user accessible area
a label referring to the enclosed module. This exterior label can use wording such as the following:
“C
ontains Transmitter Module FCC ID: XPYJODYW263
” or “Contains FCC ID: XPYJODYW
263
”.
18
Under ISED regulations, operation in the band 5150
–
5250 MHz is for indoor use only and the end product must be labelled accordingly.
19
47 CFR 2.926
