Setup
Download and install the EVK-G35/EVK-G45 software (and
documentation) from www.u-blox.com/evk-search.
See installation notes on the back of this card.
1. Insert SIM card in SIM Card Holder.
2. Connect GSM antenna with SMA connector to GSM
Antenna (SMA female connector).
3. Connect GPS antenna to GPS Antenna (if required).
4. Connect power adapter to 9 – 18 V Power Input connec-
tor (J400) (+12 V). LED DL401 is blue.
5. To supply power to the board, turn Main Power (SW400)
switch to ON position. LED DL400 is green.
6. To switch on the cellular module, press the Module
Power ON (SW302) button (the power on is triggered by
a rising edge).
Allowed connections via UART to cellular module:
7. Connect USB cable to mini USB connector (USB UART
J501). Switch SW403 must be in position MINIUSB.
8. Connect RS232 cable to RS232 connector (UART
RS232 J500). Switch SW403 must be in position DB9.
Quick Start EVK-G35 / EVK-G45
Copyright © 2018, u-blox AG
UBX-13002850 - R03
2
6
SW403
1
5
4
8
7
3
