Copyright © 2019 Fametech Inc. All Rights Reserved.
All other brands, product names, company names, trade names, trademarks and service marks used herein are
the property of their respective owners.
20
Install Micro SD Card in MP-1311
Please follow the below steps complete the installation of micro SD card.
1.
Turn off MP-1311 completely.
Then, remove off the Plastic Protective Cap or External Module located on the right side
of your tablets to find micro SD card slot.
2.
Have the rear of the tablet face towards you to install micro SD card.
2.1 To inset a micro SD card into the micro SD card slot, make sure the side with the
golden finger of the card faces downwards, and then slide the card down into the
slot.
3.
Install the Plastic Protective Cap or External Module to close the compartment.
4.
If you attempt to release a micro SD card from the slot, push the card with your fingertip
to slide it out.
Turn off MP-1311 completely before installing the Micro SD card.
Micro SD Slot (TF)
Micro USB
HDMI
USB 3.0
Internal I/O Ports Of the
Main Tablet
Main Tablet
(Rear View)
