19
1
2
3
2
1
TYPICAL GC6760 Series
Caution
Switch off machine before you insert the needle.
You can injure yourself, when the foot pedal is touched by accident.
Caution
Switch off machine before you insert the needle.
You can injure yourself, when the foot pedal is touched by accident.
5 // SETTING UP
1. Turn the hand wheel to bring the needle bar
is in the highest position.
2. Loosen needle set screw (1)
3. Push the needle (2) straight up to the top.
Make sure that the long groove shows to the left side.
4. Tighten needle set screw (1)
5/1 Inserting needle
5/2 Re-moving the bobbin case
1. Turn the hand wheel until the needle is above the needle
plate.
2. Pull the latch (1) on the bobbin case to the front and
remove the bobbin case.
3. Remove the bobbin case (2).
Inside the bobbin case is a stop motion spring (3) to
avoid spinning of the bobbin e.g. when thread cutting.
For heavy thread
Long groove
Front
Summary of Contents for GC6760 SERIES
Page 2: ...2 TYPICAL GC6760 Series...
