Minilase™ e
System Guide
4 |
P a g e
Power
up your Minilase™
Step 1: Remove the Minilase
™ system from the packing and place it on your
desk or benchtop where you plan to use it. Your Minilase™ weighs
approximately 130lbs and requires at least two individuals to move the
system. Do not try to lift the system on your own.
When lifting
Minilase™ make sure you lift
the system by the bottom black section
by putting your hands behind the front
feet or in front of the rear feet. Proper
lift point is shown in the photo.
DO NOT LIFT BY THE DOOR OR FRONT
PENDANT!
Step 2: Ensure there are at least six (6)
inches of clearance behind the machine
to enable air flow for the cooling vents.
Step 2: Pull-out touch screen. Place your
finger in the small cutout located at the
top right of the screen enclosure and pull
the screen forward. The screen will lock
in the forward position using the
magnetic catch system.
Summary of Contents for ELECTROX Minilase
Page 1: ......
