7
8
5
9. Power switch
POWER
ON
OFF
9
7
8
8. AC fuse
The fuse protects the alternating current circuit of the unit, And the fuse can only
be replaced in the event of fuse damage.
7. AC Input
This inlet connects the unit with the main power.
When the switch is set in the position ON, the unit is powered on. When the switch is
set in the position OFF, the unit is powered off.
10
11
12
13
10. HIGH
Determines the level of the high frequency band for each channel,Rotating the
knob clockwise boosts the high frequencies and produces a clearer,crisper
sound,If you start getting feedback (a high-pitched squealing sound) or you
want to make the sound softer and less harsh,tum the knob counterclockwise
slightly.
11. LOW
Determines the level of the low frequency band for each channel,Rotating the
knob clockwise boosts the low frequencies and produces a deeper,warmer
sound,If you start getting feedback or you want to make the sound less boomy,
tum the knob counterclockwise slightly.
12. Level vol.
This knob controls volume for CH5/6. Turn the knob clockwise, and the volume
increases. Turn the knob counter clockwise, and the volume decreases.
3.Audio outputs"Rec. out"
Rec output (with RCA Connectors) for connecting a recording device (or other device)
(note: the signal level is not regulated by the master level controls)
3
4
L
R
4.Phantom switch
If you set the swith on, the mixer supplies phantom power on to the XLR mic
input jacks on the channels 1.2.3.4.
6
5.Powered SP output
This is connect to powered speaker or monitor speaker.
6. MAIN SP output
This outputs is adjusted with the MASTER LEVEL control,connect only the included speaker.
13. Reverb switch.
When it is down ,It means the "Echo" is ON in this channel ,When it is up, the "Echo" is OFF
2. Stereo channel input jacks (ch5/6,7/8)
Input the and right channels of a stereo signal into the respective odd
and even channels of the mixer,These inputs are intended mainly for use
with instruments and equipment having stereo outputs,such as a
synthesizer or CD player.
2
The switch is selectable for input that you need
14
14. Monitor level control.
This knob controls volume for powered SP output . Turn the knob clockwise, and the
volume increases. Turn the knob counter clockwise, and the volume decreases.
15
15. Master level .
This knob controls volume for main SP output . Turn the knob clockwise, and the
volume increases. Turn the knob counter clockwise, and the volume decreases.
16
16. Master EQ.
This is the master "EQ" for all inputs, it included "Low" "Mid" " High",
It can be adjusted freely according to your requirement.
