3
4
Do not install this product near any direct
heat source.
Do not block areas of ventilation. Failure
to do so could result in fire.
Keep product away from naked flames.
Power
Cord
and
Plug
Do not tamper with the power cord or plug.
These are designed for your safety.
Do not remove Ground connections!
If the plug does not fit your AC outlet seek
advice from a qualified electrician.
Protect the power cord and plug from any
physical stress to avoid risk of electric shock.
Do not place heavy objects on the power
cord. This could cause electric shock or fire.
Cleaning
When required, either blow off dust from
the product or use a dry cloth.
Do not use any solvents such as Benzol
or Alcohol.
For safety, keep product clean and free
from dust.
Servicing
Refer all servicing to qualified service
personnel only.
Do not perform any servicing other than
those instructions contained within the
User's Manual.
To avoid the risk of electric shock and
damage, do not subject this product to
any liquid/rain or moisture. Do not use this
product when in close proximity to water.
Operating
Conditions
Always install in accordance with the
manufacturer's instructions.
Features
Molded, high-impact polypropylene carrying case
Convenient briefcase design
Modern ergonomics
Light weight
Interlock speakers
Internal space for cable and microphone storage
Powered Mixer
300 watts peak power
Two master speaker channels with independent volume control
eight channels of input with independent volume, low-and high EQ controls,
master EQ with low ,mid ,high
Four XLR microphone input with phantom power
Six line-level inputs
Four RCA/ inputs
Two RCA/ REC out
MP3 player (only MP8150U)
Two high-efficiency, two-way speakers
Molded polypropylene enclosures
Metal grille
Two 10" high output woofers per speaker
1 x 1" horn speaker for tweeter
Molded speaker stand receptacle
handheld microphone
Dynamic cardioid
Metal grille
On/Off switch
XLR balanced output
Cables
Two 15' speaker cables
One 15' XLR balanced microphone cable
One line cord
Frequency Response:
Distortion:
Signal/Noise Ratio:
AC Power:
Weight:
Dimensions:
Speakers:
Microphone:
Specifications
Output Power:
300 watts (peak) per channel into 4 ohm load
Less than 0.8% THD at rated output
85 dB mic input typical
115 VAC 60 Hz or
230 VAC 50/60 Hz
lbs. (33 kg)
700mm (L) x 310mm (W) x 610mm (H)
Woofer 10" (100 mm)
Dynamic Horn Tweeter
Dynamic, Cardioid (Unidirectional)
40 Hz to 25 kHz +0/-3 dB measured at 1 W
To avold damage to speakers , be sure to
turn off ampliffiers (or powered speakers),
We also recommend that you turn the
"master level "control to the minimum
setting before operating the switch,to
avold excessively loud noises that could
cause hearing loss or device damage.
!
