Figure 2: Camera interior buttons and I/O ports
Note:
Use the T10 security L-Key to unscrew the three screws (5) (Figure 1) on the
bubble assembly to access the interior buttons I/O ports.
Figure 2
Security
Quick Start Guide
(8200-2076-01_A0)
Illustra Flex Gen4, 2MP, 4MP & 8MP Indoor Dome cameras
Note:
Please visit
for access to firmware updates that include
new features, cyber-security enhancements and bug fixes.
In the box
•
1 x Flex Gen 4 Dome Camera
•
1 x Torx T10 Security L-Key
•
1 x Adaptor Plate (for use with pendant cap and electrical box)
•
3 x 18mm screws & 3 x Plastic screw anchors
•
2 x 8 mm screws (for use with the pendant cap)
•
1 x Desiccant bag
•
1 x Plastic side cover
•
1 x Waterproof cap
•
1 x Waterproof rubber insert
•
1 x Printed Regulatory Document & 1 x Printed QSG
•
1 x Mounting template sticker
Installation tools
•
1 x Screwdriver
•
1 x Drill
•
1 x Wire cutters
Figure 1: Flex Gen 4 Indoor Dome camera parts
Figure 1
Table 1: Flex Gen 4 Indoor Dome camera parts descriptions
Number
Description
1
Pre-Fitted RJ-45 cable
2
Camera bottom base
3
Tilt adjustment bracket
4
Bubble assembly
5
Captive screw (x3 located on the bubble assembly)
Quick reference
•
Default IP: 192.168.1.168 (DHCP enabled)
•
Default Username / Password: admin / admin
•
Power: PoE Class 3 or 24V AC / 50-60Hz / 0.6A
Table 2: Camera interior buttons and I/O ports
Icon
Description
Resets to factory default. Press and hold for five seconds
Reboots the unit
Micro USB port connection
Power over Ethernet (PoE) port
Alarm / Audio pins (See Figure 3)
24V AC
HDMI Video out (requires HDMI cable, sold separately)
Micro SD card slot
Figure 2: Camera interior buttons and I/O ports (continued)
Note:
Connectors and field wiring terminals for external Class 2 circuits
provided with marking indicating minimum Class of wiring to be used. Class 2
shall be marked adjacent to the field wiring terminals.
Figure 3: Alarm and audio pin definitions
Figure 3
Mounting the camera
Refer to the Illustra mounting accessories webpage
https://www.illustracameras.com/products/accessories/mounts
for assistance. The
following mount accessory part numbers are applicable with the Illustra Flex Gen4
2MP, 4MP and 8MP Indoor Dome cameras: ADCi6DPCAPIW, IFDRECMNT,
ADLOMARM, ADCDMPOLE, ADCDMCRNRO, and IBJB-F-4NSD-A.
