Tyco Security Products SG-System 5, Operating Manual

Page: 81 / 108

6.0 Options
- 81 -
6.2.4 SG-DRL5-IP Options: [4XX] - System Options
Option [401]: Connect 24 Program Confirm Disable
Default (00)
This option enables the receiver to block requests for Connect 24 and DLS program confirmation. When enabled (01), the receiver does not respond to
confirmation requests from Connect 24 or DLS. When disabled (00), the receiver responds to confirmation commands. For installations using the Con-
nect 24 programming service, leave this option disabled.
Option [402]: UTC Time Update
Default (00) - Disabled
This option defines the time zone that the SG-System 5 is operating in. From the table below, locate the appropriate time zone, then program option
[402] with the value in the first column.
This is a dynamic option and will follow the profile setting it is assigned to for the associated DNIS.
Programmed (Hex) GMT Offset Time zone Short code Time zone name
0 NA NA Disabled
1 -12 BIT Baker Island Time
2 -11.75
3 -11.5
4 -11.25
5 -11 NUT Niue Time
SST Somoa Standard Time
6 -10.75
7 -10.5
8 -10.25
9 -10 HAST Hawaii-Aleutian Standard Time
THAT Tahiti Time
TKT Tokelau Time
CKT Cook Island Time
0A -9.75
0B -9.5 MIT Marquesas Island Time
0C -9.25
0D -9 AKST Alaska Standard Time
GIT Gambier Island Time
0E -8.75
0F -8.5
10 -8.25
11 -8 PST Pacific Standard Time
PST Pitcarirn Standard Time
CIST Clipperton Island Standard Time
12 -7.75
13 -7.5
14 -7.25
15 -7 MST Mountain Standard Time
16 -6.75
17 -6.5
18 -6.25
19 -6 CST Central Standard Time
GALT Galapagos Time
PIT Peter Island Time
EAST Easter Island Standard Time
1A -5.75
1B -5.5
S
G
-S
ys
te
m
5
O
pe
ra
ti
ng
M
anua
l