9
of the compressor body. Apply Loctite 454 to the rear cylinder housing
mating surface of the compressor body adjacent to the fixing screw holes.
Place the laminations and coils, with the wire grommet facing towards
you, on top of the compressor body. With one hand keep the
laminations elevated above the adhesive.
Position the rear cylinder housing with screws and washers between the
coils and on the alignment tool. Insert and tighten the rear cylinder
housing retaining screws.
Place the rear cover onto the upper surface of the laminations. Lower
the laminations and rear cover onto the adhesive on the compressor
body. Insert and tighten the rear cover retaining screws. Wipe off any
excess adhesive.
Remove the alignment tool.
Compressor body
Rear cylinder housing
Rear cylinder housing
bearing insert
Rear cover
Front cover gasket
Plate
Air filter
element
Cylinder
head
Outlet
port
PTFE
gasket front
Rubber mounts
Spring seat
Spring
Piston assembly
Sealing ring
PTFE gasket rear
Front cylinder housing
Exhaust valve assembly
Figure 3: Compressor user serviceable parts
Summary of Contents for KENDALL 6060 Novamedix A-V Impulse System
Page 1: ...SERVICE MANUAL MODEL 6060...
