409-10042
DT-3000 Machines 1725100-[ ] and DT-5000 Machines 1725800-[ ]
Rev E
7 of 22
Tyco Electronics Corporation
Figure 5 (End)
Swing Handle
Base Plate forMachines -4
2.2. Electrical Description
The electrical components of these machines consist of the operator control panel, the motor, and the
CPU/motor controller package. The machine operates on 100/240 Vac, 50/60 Hz, single–phase current with
ground. The machine will automatically detect the supply voltage and adjust the controller accordingly.
The operator control panel (Figure 6) is mounted on the left side of the machine frame. The control panel
consists of an indicator light, a jog button, and a speed control knob, with icons depicting each function. See
Paragraph 4.1 for control panel operation.
A main power switch/circuit breaker (Figure 7) is located on the back of the machine. This switch connects ac
power to the control system. The CPU/motor controller is located behind the back cover of the machine. It is a
modular unit that contains all of the electronics necessary to operate the machine. See Figure 7.
The CPU/motor controller package for the DT–5000 machine includes a motor cooling fan. This fan runs when
the main power switch is on.
The CPU/motor controller package contains high voltages which can remain even after power has been removed.
Contact the Tooling Assistance Center at the number on the bottom of page 1 for precautionarymeasures to follow if
internal access to the CPU/motor controller is required.
Figure 6
Green Indicator
Jog Button
Speed Control Knob
Fault Icon
Machine Ready
Icon
Speed Control
Icon
Jog Button Icon
Batch Counter
DANGER
