409-10042
DT-3000 Machines 1725100-[] and DT-5000 Machines 1725800-[]
Rev E
3 of 22
Tyco Electronics Corporation
Front View
Back View
DT-3000 Machine Shown
DT-3000 or DT-5000 MACHINES
STROKE (mm [in.])
APPLICATOR Ċ MACHINE BASE PLATE
-1
30 [1.181]
JAM Ċ Universal
-2
30 [1.181]
AMP Ċ Quick-Change
-3
41.28 [1.625]
AMP Ċ Quick-Change
-4
30 [1.181]
JAM Ċ Quick-Change
-5
30 [1.181]
JST Ċ Universal
-6
30 [1.181]
AMP Ċ Quick-ChangeH
-7
41.28 [1.625]
AMP Ċ Quick-ChangeH
Figure 1
H
Includes Crimp Quality Monitor (CQM) Sensor
1. INTRODUCTION
This manual contains information on operation, preventive maintenance, and adjustments of DT–3000
Machines 1725100–[ ] (shown in See Figure 1) and DT–5000 Machines 1725800–[ ]. Descriptions in this
manual pertain to the controls and adjustments on these machines
only.
The machines are intended for use with (AMP) Tyco Electronics applicators, JAM (Toyojamco Ltd.) applicators,
and JST (JST Manufacturing Company Ltd.) applicators as indicated in Figure 1. All of these machines are
restricted to China.
When reading this manual, pay particular attention to DANGER, CAUTION, and NOTE statements.
