409-10042
DT-3000 Machines 1725100-[ ] and DT-5000 Machines 1725800-[ ]
Rev E
19 of 22
Tyco Electronics Corporation
7.2. Lubricator BowlAssembly 354550-3
(Figure 13)
The lubricator bowl is used to apply a small amount of lubricant to terminals to prevent them from jamming in
the machine after the crimping process.
Figure 13
Lubricator
Bowl
Lubricator Bowl
Bracket
7.3. Air Feed Kit 1424266-[ ]
Install the optional air feed kit onto the machine as follows:
1. Remove the four mounting bolts securing the rear controller panel to the frame. Refer to Figure 14.
2. Remove the control panel from the machine, and pivot it in order to view the control board.
3. Insert the small end of the air feed cable assembly (see Customer Drawing 1424266) into the J7
socket. See Detail in Figure 14.
4. Install the control panel into the machine with the air feed cable assembly through the upper right
hand slot in the machine frame.
5. Remove the two bolts securing the rear of the left sheet metal guard.
6. Install Air Feed Bracket 1338977–1 to the frame (see Figure 16) using the two bolts securing the
sheet metal guard (Figure 14).
