Tyco Electronics AMP-O-LECTRIC 690675-2, Instruction Sheet

Page: 1 / 4

Instruction Sheet
AMP-O-LECTRIC* TerminatingMachine
Conversion Kits 690675-2 and 692613-1
408-8022
LOC B
1 of 4
E2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.tycoelectronics.com
06 FEB 09 Rev A
for Miniature Quick-Change Applicators
ITEM NO. PART NO. DESCRIPTION QTY
1 690671–1 PLATE, Base 1
2 690672–2 MOUNT, Base 1
3 4–21002–4 SCREW, Btn Hd Cap, 3/8–16 x .500 in. L 3
4 3–21000–6 SCREW, Skt Hd Cap, No. 10–32 x .625 in. L 2
5 690673–2 BRACKET, Hold–Down 1
6 2–21000–7 SCREW, Skt Hd Cap, No. 8–32 x .500 in. L 2
7 690674–1 STOP, Rear 2
8 21009–4 SETSCREW, Skt, Slflkg, 1/4–20 x .375 in. L 1
9 690499–1 RAM 1
10 –– Deleted ––
11 694925–1* BRACKET ASSY, Vertical Reel REF
12 694928–2 BRACKET, LH Stock Guide 1
13 470268–1 GUIDE, Stock 1
14 3–21000–1 SCREW, Skt Hd Cap, No. 8–32 x 1.00 in. L 4
15 27708–3 KNOB, Thumbscrew 2
16 21022–2 NUT, Slflkg, No. 8–32 1
17 455744–1 SHROUD, End Feed 1
18 455745–1 GUARD, End Feed 1
19 1–21899–3 WASHER, Flat, No. 8 12
20 21018–6 NUT, Hex, No. 8–32 7
21 7–22468–0 SCREW, Bdg Hd, No. 8–32 x .375 in. L 5
22 7–22468–3 SCREW, Bdg Hd, No. 8–32 x .750 in. L 1
23 22280–1 SPRING, Compression 1
24 455748–1 SHROUD, Side Feed 1
25 455749–1 GUARD, Side Feed 1
26 3–21002–4 SCREW, Btn Hd Cap, 1/4–20 x .625 in. L 1
27 21899–3 WASHER, Flat, 1/4 in. 1
*Refer to Customer Manual 409–5128 for the detailed parts breakdown of assembly and related parts..
Figure 1