Transport GX18 Quick Installation Guide
3. Installing PCI-E Card
Document # D1771-100
5. Rack Mounting
Step 2:
Lift and mount the chassis into the rack. Secure
the chassis with two screws onto each side of the rack.
Step 4:
Connect the PCI-E card with the riser
card .
2. Installing HDD
Step 1:
Use a screw driver to release the screw
securing the bracket.
Step 3:
Install the PCI-E riser card into the
PCI-E 8x slot.
Step 2:
Follow the directions below to take off the
bracket.
1. Screws List
Right: M3 x L4
Middle: #6 x 32 x L5
Left: M5 x L4
Step 3:
Secure the mounting plate with 2 screws
onto each side of chassis.
Step 5:
Screw to secure the PCI-E card.
Step 4:
Secure the mounting plate with 2 screws onto each back side of the rack.
Step 1:
Measure the distance of inner side between the
front and rear mounting brackets in the rack. Secure the
mounting plate to the chassis with two screws for each
side.
Step 1:
Remove the cover and unscrew the HDD
tray.
Step 3:
Screw the SATA HDD to the tray.
Step 2:
Take out the HDD tray and
insert the SATA HDD into the tray.
Step 4:
Connect the SATA HDD cable and power
cord.
Step 5:
Put down the HDD tray and push
it backward to lock. Screw the HDD tray
to the chassis.
