background image

 

http://www.tyan.com 

1

 
 

 

 

S7016 

 Version 1.1

 

 

 

Copyright 

Copyright © 2009 MiTAC International Corporation. All rights reserved. TYAN

®

 is a 

registered trademark of MiTAC International Corporation. 
 

Trademark 

All registered and unregistered trademarks and company names contained in this 
manual are property of their respective owners including, but not limited to the 
following. 
 
TYAN

®

 is a trademark of MiTAC International Corporation. 

Intel

®

 5500 Series and combinations thereof are trademarks of Intel Corporation. 

AMI, AMI BIOS are trademarks of AMI Technologies. 
Microsoft, Windows are trademarks of Microsoft Corporation. 
SuSE is a trademark of Novell. 
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation. 
 

Notice 

Information contained in this document is furnished by MiTAC International 
Corporation and has been reviewed for accuracy and reliability prior to printing. 
MiTAC assumes no liability whatsoever, and disclaims any express or implied 
warranty, relating to sale and/or use of TYAN products including liability or 
warranties relating to fitness for a particular purpose or merchantability. MiTAC 
retains the right to make changes to product descriptions and/or specifications at 
any time, without notice. In no event will MiTAC be held liable for any direct or 
indirect, incidental or consequential damage, loss of use, loss of data or other 
malady resulting from errors or inaccuracies of information contained in this 
document.

 

 
 

Summary of Contents for S7016





























































































Reviews: