120
80
12
45
Charging case
TWS Wireless Bluetooth Earbuds
User Manual
Model: EP
009
1.TO CHARGE CHARGING CASE
2.TO CHARGE EARPHONES
3.POWER ON
（1）.Connect the lightning cable to lightning port on the charging case
（2）.Plug the USB connnector of the cable into a USB Power source
（3）.The indicator light will show RED while the charging case is charging,Depending on the power delivered to the
charging case, the charging case will take approximately 2 hours or more to completely charge
（4）.The indicator light will go solid blue, then blink, then turn off when the case is fully charged
（1）.TWS mode (Due-ear)Press and hold the multi-function key on either earphone for3 seconds. Release when the red
indicator light is on with a voice prompt:“POWER OFF”
（2）.Independent use mode (Single Ear, L or R)Press and hold the multi-function key on the used earphone for
3 seconds. Release when the red indicatorlight is on with a voice prompt:“POWER OFF”
(3) .Put the earphones in the charging case correctly, will auto shutdown
* The battery status of earphones is visible on connected devices, when it's running out of power, the earphones will remind you with a voice prompt:
“LOW BATTERY, PLEASE CHARGE", pls recharging in time
◆ To Answer A Call
Press the multi-function key of the right earphone one short
◆ To End A Call
Press the multi-function key of the right earphone one short. Voice response
tone“call ended”
◆ To Reject A Call
Press and hold the multi-function key of the right earphone for 1s. Voice response tone“call rejected”
◆ To Redial A Call
Press the multi-function key of the right earphone twice, Voice response tone “redialing”
◆ To Play and Pause Music
Press the multi-function key on either earphone once
◆ To Play the next song
Press and hold the multi-function key on either earphone for 2s
（1）.Put the earphones in the charging case correctly, charging case will start to charging automatically
（2）.The indicator light on the earphones will turn RED while charging
（3）.The indicator light on the earphones will turn OFF when fully charged
Press and hold the multi-function key on BOTH L and R earphone for 3 seconds simultaneously, release when the BLUE
light is on with a voice prompt:“POWER ON”
Multi-Function Key
Multi-Function Key
（2）.Enable the bluetooth pairing mode on your phone device. Tap on “Air plus” to connect. Right earphone will response
with a voice prompt:“CONNECTED”and blue light flash when connected successfully
4.PAIRING
（1）.When power on, L and R earphones will connect each other automatically and sound with a voice prompt: “
CONNECTED” , and the indicator lights of R earphone will flash blue and red with a voice prompt: “PAIRING”, While blue
indicator light of L earphone flash slowly (*)
Please read follow and keep these instructions:
(1).Keep the device out of extreme heat and humid
(2). Power time may different depending on personal habits
(3). Heed all warnings on the product and in the operation instructions
(4). Do not listen at high volume level for long period to protect hearing
(5). Stop using this product immediately if it causes discomfort or pain
(Ⅰ）Functional Diagram
(Ⅱ）HOW TO USE
5.SINGLE EAR FOR INDEPENDENT USE
(Ⅲ）Specification
(Ⅴ）Safety Precautions
Version: 2.0
（3）.Earphones will response with a voice prompt:“DISCONNECTED” when bluetooth signal is cut off, and shutdown 5mins
later automatically
（4）. When power on,the earphones will connect the last paired mobile automatically. If not, pls repeat step 2.
1. Press and hold the multi-function key for 6 seconds on either earphone (base on your personal preference), release when
the red and blue light flash alternately
2. Enable your phone’s Bluetooth pairing function and search for the “Air plus”to pair and connect
*
Right headset
is the Main-headset by default
NOTE: IF you see 2 Airplus entries in available devices then the earphones are not paired correctly. Pls follow below steps to get it paired correctly
*Both L and R earphones are well paired before it leaves the factory,
Right earphone
is the Main-headset by default, thus you may connect with your
bluetooth devices directly. If they are not paired or reset to defaults, you need to pair 2 earphones manually as below steps:
a. Press and hold the multi-function key for 6 seconds of both earphones simultaneously, release when the indicator lights turn in red and blue, and
response with a voice prompt: “PAIRING”, then they will be paired and connected automatically and response with a voice prompt: “CONNECTED”
b. When paired successfully, the indicator lights of R earphone will flash alternately in blue and red, While blue indicator light of L headsetflash slowly
c. Go back to step 2 to connect with your devices
6.POWER OFF
7.PHONE & MUSIC
7.OUTDOOR USE
（1）. Bluetooth Headset X 2PCS
（2）. Charging Case X1PCS
（3）. USB lightning charging cable X1PCS
（4）. User Manual X1 PCS
(Ⅳ）Inside the box
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
43.5×17.2×18.5（mm）
7.6
（16 ）
Earphone R
Mobile
Right earphone receiving mobile bluetooth signal
suggest puting mobile in right pocket.
This can avoid signal cut off by human body and
increase antijamming capability of outdoor use.
Best signal in
right pocket
103 +3dB At 1000 Hz At 0.126V