Twose TC526, Operation Manual

Page: 50 / 56

39
SERVICE SCHEDULE
Every Day

Grease machine fully prior to work (and prior to storage).
NOTE: New machines must be greased before initial use.

Check for broken or damaged flails.

Check tightness of flail nuts and bolts.

Visually check for oil leaks and damaged hoses.

Check all guards and safety shields are correctly fitted and undamaged.

Ensure all lights are working and clean.

Check oil level.

Clean the cooler matrix, in dusty conditions more frequent cleaning is required.
After initial 12 Hours

Change return line filter element.
Failure to do so will invalidate the warranty.
Note; factory fitted filter elements are identified differently to replacement elements.
After initial 50 Hours

Change gearbox oil.
Every 25 Hours

Grease PTO Shaft universal joints and tubes.
Every Week

Check tightness of all nuts and bolts.

Check gearbox oil level.

Check for wear on telescopic arm pads –
where applicable.
Every 100 Hours

Grease PTO shaft shield lubrication points.
Every 500 Hours

Change return line filter element.

Change gearbox oil.

Check condition of hydraulic oil and change if required;
when changing oil new
return line filter and suction strainer elements should be fitted and return line filter
changed again after 12 hours of work.
Annually

Change tank breather.
PTO Shaft Lubrication