Twister Storm 3DX Assembly & Flight Training Manual Download Page 1

SpecificationS

Main rotor diameter..............................................720mm

Tail rotor diameter .................................................135mm

Length .....................................................................630mm

Weight (not incl. receiver & battery) .......500g (17.5oz)

contentS

1..................................................... Assembled helicopter

1.......Twister 2.4GHz 6 Ch. computer radio - installed*

1.....................Planet R6M 2.4GHz  receiver - installed*

1.........................Twister HL400 tail lock gyro - installed

4..........................................EnErg S7.5 servos - installed

1...........Cyclone 440 Turbo brushless motor - installed

1................ Twister 25 amp speed controller - installed

1.................Twister 11.1V lithium polymer battery pack

1............... Twister lithium polymer 12V DC/DC charger

1.................................Twister 240V mains power supply

1.........................................................Foam blade retainer

8................................................AA size pencell batteries

1.........................Twister Storm 3DX instruction manual

featureS

  Test-Flown & Flight-Guaranteed!

  CCPM 120° flight control system for precise control

  3D flight performance without upgrading

  High performance, low current, brushless motor

  Digital proportional Twister R/C 2.4GHz transmitter 

with silky smooth sticks*

  High quality ball bearings

  Planet R6M 6-channel receiver installed*

  High performance, low friction belt tail drive

  Professional HL 400 tail lock & std dual rate gyro

  Autorotation freewheel fitted

  Professional digital servos installed

  Strudy 2-part main frame design

 

Thrust & ball raced main blade grips

 

Ball raced tail pitch slider

 

Twin ball raced tail pitch bell crank

 

Twin boom support kit fitted.

*Twister Storm 3DX is available in two versions.

This item is not included in the 'Radio Ready' version.

twiSter Storm 3DX

electric 400 claSS 3D aerobatic rtf heli 

the profeSSional 3D helicopter

V7.10

R/C

TWISTER

Factory-assembled Storm 3DX helicopter with 2.4GHz 6 channel 8-model memory radio*, 

brushless motor, ESC, lipo, charger, power supply, heading lock gyro and MORE!

the profeSSional choice 

for 3D aerobaticS!

Assembly & Flight Training guide

the

 

profeSSional 

choice for 

 

ultimate

 3D flight!

Summary of Contents for Storm 3DX

















Reviews: