background image

1

CONSUMER SAFETY INFORMATION

PLEASE READ THIS MANUAL BEFORE INSTALLING

          AND OPERATING THIS APPLIANCE

WARNING!!

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED

EXACTLY, AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING

PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS 

AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

E L E C T R I C   S T O V E   W I T H   H E A T E R

        HOMEOWNERS OPERATING MANUAL

    MODEL: DFS-550-6

V E N T F R E E D E C O R A T I V E   E L E C T R I C   S T O V E

Thank you and congratulations on your purchase of a Twin-Star International, Inc. 

stove. Please read the Installation & Operating Instructions before using this

appliance.

IMPORTANT: Read all instructions and warnings carefully before starting installation.

Failure to follow these instructions may result in a possible electric shock, fire hazard

and/or injury and will void the warranty.

 

Installation of Electric Fireplace, should take 15 minutes. The only tool required is a

Phillips head screwdriver, not supplied with this unit.

E-mail: [email protected]
In English Call: 800-318-9373
In French Call: 800-318-9374
In Spanish Call: 800-318-9373
 

For Customer Service:

WARNING: THIS IS AN UNVENTED, 

ELECTRIC APPLIANCE. DO NOT 

ATTEMPT TO BURN WOOD OR 

MANUFACTURED FIRELOGS IN OR 

ON THIS APPLIANCE OR GRATE.

Distributed by 
Twin-Star International, Inc. Under license. 
duraflame

TM

 and the duraflame flame 

logo are trademarks of Duraflame, Inc.

Twin-Star International, Inc.
Delray Beach, FL 33445

Made in China • Printed in China

Made in China

Printed in China

Meijer.com

Summary of Contents for DFS-550-6










Reviews: