Twin Cut 08-00002/3, Instruction Manual

Page: 28 / 28

28
Circular saw blades
Safety Precautions
Correct use
Sharpening and blade care
General information
The circular saw blades are used for ripping, cross cutting and cutting grooves in wood, woodan materials,
other similar materials or composites. If the system is not used as directed, the machine and / or the saw blades
can be damaged or fragments of the saw blade might break away. Fragments of the saw blade which fly off or are
stuck in or in any workpiece, increase the risk of injury.
Use : The maximum permitted speed (r.p.m) must not be exceeded. Clean the area of the blade in contact
with the clamping flange carefully, before fitting.
The blade : Check the cutting edges. Check the machine settings. The arrow on the circular saw balde indicating
direction of rotation must correspond to the direction of rotation indicator on the circular saw. Disconnect the
tool from the electric supply or, respectively, remove the battery in order to ensure that It cannot be started
unintentionally while the blade is being changed.
Conformance : This circular saw blade was developed and manufactured in accordance with the.
DIN EN 847-1 standard
After falling to the floor, or any other similar incident, a circular saw blade must be checked for damage.
Damaged circular saw blades must not be used. Observe all safety instructions and warnings in the
operating instructions for the sawing equipment.
The balde must no longer be used if its steel disc shows signs of cracking or deformation.
Welding and brazing repairs to the steel disc are not permitted for safety reasons. Composite circular saw
blades on which the height or thickness of the blazed-on cutting tips has been worn down to less than 1 mm
must not be used.
Resharpening, maintenance and repairs to circular saw blades may be carried out only by a competent
persons who know the blade design requirements and understand the applicable safety regulations.!
Correct professional maintenance has a decisive influence on the blade's long-term precision and performance.
Blades must be used only in paris as provided by us.
Twincut Technology is registered trade mark of indocean Diamond Tools Ltd., Bermuda.