Chapter 5 Data processing
- 44 -
Chapter 5 Data processing
5.1. Processing of the measured data
Portable/handheld ultrasonic flowmeter (energy meter) measurement data can be
processed in a variety of ways, data flow control Settings can be made in the M52
menu.
5.2. Printing of measurement data
Portable ultrasonic flowmeter (energy meter) is randomly equipped with a
24-column character thermal printer. When the data flow control in the M52 menu
chooses to output to the internal serial bus, the printer is ready for printing.There
are two kinds of printing, one is screen copy printing, one is timing printing.
1)
Screen copy printing
Using the M99 menu, you can copy and print the screen, that is, print what the
screen shows.
Several print-related menus:
M96 Menu: paper, tear off the paper before, please click here;
；
M97 Menu: print the content of the initial setup, including the M11 ~ M25
content set, used to check whether the initial parameters set correct;
M98 Menu: print measuring the contents of self-diagnosis, including the
content of the set in the M90 ~ M94, used to check installation, measurement
is correct
2)
Timing printing
The operation of timing printing is divided into two steps. Firstly, the timing printing
Name
Handheld ultrasonic flowmeter
(energy meter)
Measurement
data flow
control
To the built-in recorder
Built-in 32Mbit storage
To the serial port
RS232 interface upload
Summary of Contents for MC-SUP2000H
