Assembly Instructions SBT24
10
4.3 Assembly SBT24 to loudspeaker
Figure 4.3.1 - Assembly SBT24 to T24N loudspeaker
1. Place the T24N
loud
speaker on the floor with the bottom or top, depending on the appli-
cation. Make sure to place the speaker on a clean, non-slippery surface.
2. Then guide the SBT24 swivel bracket from behind with both side arms (see figure 4.3.1)
at the height of the air-cargo rigging recesses to the T24N loudspeaker.
Depending on the application, the SBT24 swivel bracket is mounted on the bottom or top of
the T24N loudspeaker.
The procedure during assembly is the same.
