manual / guaranteecard
meAsUring time with the ChronogrAph
Adjusting the date
Adjusting the date
Pull out the crown to the 1st
position. Turn the crown to the
left to set the date.
After the date has been set, push
the crown back to the normal
position.
CAUTION: IF THE CROWN IS NOT PRESSED
IN PROPERLY, THE WATCH IS NO LONGER
WATERPROOF AND THE MOVEMENT CAN
BE SERIOUSLY DAMAGED!
Using the chronograph
The chronograph is able to
measure and display the time in
1/1 second united up to an maxi-
mum of 1 hour. The chronograph
can be started and stopped
each time button A is pressed.
Pressing button B resets the
chronograph. All hands return to
their (0) position.
If the chronograph second hand
does not return to the (0) position
after the chronograph has been
reset or after replacing the bat-
tery, you should do the
following: Pull out the crown to
the 2nd position. Press button A
to set the chronograph second
hand to the (0) position.
The chronograph hands can be
advanced rapidly by continuously
pressing button A or B. Once the
chronograph second hand has
returned to the (0) position, push
the crown back to the normal
position.
AdJUsting the dAte
AdJUsting the dAte
Guaranteecard_Pilot.indd 1
04-02-13 14:07
manual