background image

Assembly instructions FDBSX

5

1. Safety | Intended use

To avoid risks please observe the following safety instructions when using accessories.

The FDBSX front cover was developed for use in professional sound systems. The front cover 
may only be used by trained and qualified personnel.

Note the operating modes described in this operating manual. Other uses are not permis-
sible.

Damage caused by improper use is not covered by TW AUDiO

The front cover FDBSX may only be used with the loudspeaker BSX. 

These assembly instructions describe how to use the FDBSX front cover. Any other use shall 
be deemed improper and may result in damage or even injury. 

Modifications or alterations to individual parts of the FDBSX front cover are not permitted!

WARNING

The FDBSX is an accessory designed both for indoor and outdoor use.

The FDBSX front cover may only be used by trained and qualified personnel. Personnel must 
check the FDBSX for its full suitability before each use.

WARNING

When visible damage to any part of the FDBSX front cover is detected, it must be decommis-
sioned immediately.

Before each installation, check the integrity of the FDBSX front cover and ensure that all com-
ponents are in perfect condition.

WARNING

CAUTION

WARNING

Summary of Contents for FDBSX











Reviews: