37
- Remove the handle bar sleeve and take out pulley gear
shift.
- Remove cover handle bar ( C ) by loosening two screws
- Loosen lock nut and adjuster nut near pulley at engine end
Removal
- Pull out cable inner gear shift
Gear cable inner replacement
- Remove the lock clip ( D )
- Loosen pulley gear shift nut at engine end and take the
pulley out
- Insert cable inner through cable outer and adjuster
- Loosen pulley nut and take out pulley
- Take out adjuster gearshift cable from stopper
- Pull out cable inner and connect to pulley at engine end
through pinch bolts
Assembly
- Apply oil on inner and route it through outer and holes
provided in the pulley gear shifter and tighten pinch bolts.
- Connect gear cable inner to pulley gear shifter at handle
bar end.
Gear cable assembly at engine end.
Gear cable assembly at engine end.
A
B
SELF MAINTENANCE PROCEDURE
