manualshive.com logo in svg

TVS Apache RTR 160 BS-VI, Owner'S Manual

Share
Download
TVS Apache RTR 160 BS-VI Owner'S Manual Download Page 45

32

COVER FRAME R

TVS Apache RTR 160 is provided with a lockable cover 

frame on the right side for accessing the battery, rear 

disc brake fluid reservoir* and seat lock cable. Cover 

frame R can be opened in the following manner :
1.  Insert the control key in the cover frame lock (1) 

and rotate it in clockwise direction.

2.  Take out the cover frame by gently pulling out at 

front (2) and rear (3) end of the cover frame. 

1

2

3

To assemble the cover frame back
1.  Locate the lugs of the cover frame at (2) & (3) to 

the holes provided in the fuel tank assembly and 

the frame while ensuring the availability of the 

cushion in the holes.

2.  Gently press the cover frame lugs into the holes.
3.  Now, lock the cover frame by turning the key in 

anti-clockwise direction.

*     Applicable only for rear disc brake model

Make sure that the cover frame is locked securely in 

position after installation.

Summary of Contents for Apache RTR 160 BS-VI





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands