manualshive.com logo in svg

TVS Apache RR 310, Owner'S Manual, Page: 97 / 200

Share
Download
TVS Apache RR 310 Owner'S Manual Download Page 97

84

First time Bluetooth paring:

To pair your Android smart phone or iPhone with 

your TVS RR310’s connected instrument cluster, via 

Bluetooth, for the first time.

•   In order to pair device, select “preferences”  in 

‘menu’ by navigating to connectivity   paired 

device.

 

•   Press down button and press the set button to 

pair a new device.

•   Once a device is selected the new paired device 

icon will blink.

•   Ensure that switch ON bluetooth in your mobile 

device

•   

During the pairing, the bluetooth symbol   ‘ 

 

’flashes in the connected TFT instrument cluster.

•   Open  the 

TVS Connect

 app and press 

“CONNECT”, ensure the smart phone is near to 

the vehicle.

•   Press and hold “CONNECT” for 2 sec to erase 

previous vehicle details and connect with a new 

vehicle in the TVS connect app.

CURRENTLY THERE ARE NO

PAIRED DEVICES

Paired Devices

PAIR NEW DEVICE

Summary of Contents for Apache RR 310









































































































































































































Reviews:

No comments