manualshive.com logo in svg

TVS Apache RR 310, Owner'S Manual, Page: 45 / 200

Share
Download
TVS Apache RR 310 Owner'S Manual Download Page 45

32

CONNECTED TFT INSTRUMENT CLUSTER KEY 
FEATURES (ref. Fig. 19)

•   Your motorcycle is fitted with a 5” TFT instrument 

cluster.

•  It has an advanced UI /UX design for TFT screen 

with cognitive ergonomics.

•  The cluster has 4 different themes for 4 different 

rides in Day & Night modes which give you a rich 

user experience.

•   The TFT cluster in combination with infotainment 

switch enables you on-the-go mode selection.

•   Gear shift assist display helps you to drive your 

motorcycle for the best performance or fuel 

economy depending on the ride mode you have 

selected.

•  In-built photo-sensor helps to automatically 

adjust the brightness and change the day and 

night mode of the screen if it is in AUTO.

•   User alerts are made easy and effective with 

warnings and messages on the screen.

•   Layout, font size, colors and themes enable quick 

and easy data access.

Fig. 19

Summary of Contents for Apache RR 310









































































































































































































Reviews:

No comments