TVS Apache RR 310 Owner'S Manual Download Page 172

Page: 172 / 200

159

Taking Long Trips

When taking the motorcycle a long trip more than

500 km follow the instructions given below:

A) Keep the following items for use incase of

emergency
•  Complete tool kit and first aid kit.
•  Recommended spark plug one number.
•  Clutch cable each one.

B) Precautions to be taken for the journey:

• Ensure engine oil and brake fluid level are

upto the mark.

• Ensure the coolant level.
• Adequate fuel in the tank.

C) Check the motorcycle for the following:

• Tightness of all fasteners for the correct

torque value.

•  Fitness of tyres and tyre pressure.
•  Working of all the lamps and horn.
•  Balancing of wheel.
•  Smooth functioning of all cable and their free

plays.

• Smoothness of steering operation.

• Slackness and lubrication of chain.
• Front and rear brake functioning and rear

brake switch working.

•  Front fork for any abnormality.
•  Spark plug cleanliness and condition.
•  Air filter element cleanliness.
•  Lubrication of all necessary parts.
•  Any other jobs as necessary.

Ensure the first aid equipments are changed periodically

based on the expiry.

Note

Long journey are to be taken only after the running-in

(ref. page 01).

Have your vehicle checked for the above mentioned

items at TVS Motor Company Authorised Main Dealer.

Caution

Summary of Contents for Apache RR 310









































































































































































































Search results

Summary of Contents for Apache RR 310

Reviews:

TVS Apache RR 310, Owner'S Manual, Page: 172 / 200

Search results

Summary of Contents for Apache RR 310

Reviews: