2
tvONE
Fitting the ONErack internal power supply
To avoid damaging your ONErack, build it in a clean, tidy area.
This installation guide assumes you have already built a ONErack
chassis.
Read more about building a chassis in the installation guide for the
ONErack chassis. The guide is available from the
Support Documents
tab at
www.tvone.com/onerack
You can place the internal power supply anywhere in your ONErack
chassis. If you decide to mount the internal power supply at the right-
hand end of the chassis, leave a minimum of 10 numbered holes to
the right of the guide rail. This allows space for airflow.
1. Clip the guide rails into the lower and upper mounting rails.
Use the numbers to help you fit the guide rails straight and in
line with one another. You can also use the template included
in the box.
Make sure the groove is on the right when you look from the
front of the chassis.
