3
tvONE
Fitting the guide rails and dock
1. Slide the module into the groove in the guide rails.
2. Screw the module in place temporarily with one or two M3
screws.
3. At the rear of the chassis, push the dock into the voltage
selector.
If you have a dock with a bracket, use the slot in the bracket to
help you align the dock. If you have a dock without a bracket,
push the connector on the dock into the connector on the
voltage selector.
4. Screw the dock in place with two M3 screws.
Summary of Contents for ONErack extra power
Page 2: ......
