PDF-MG-KVM-83x-V1.00
17
Connecting, disconnecting, and switching encoders
You can quickly connect, disconnect, and switch between encoders.
If you’re
viewing multiple PCs with WindowView, first move your
mouse pointer to the area of your monitor where you want to make
a change.
Connect, disconnect, and switch encoders in the
Switching List
menu. In the
Home
menu, press L.
▪
To connect or switch to an encoder, use the arrow keys to
navigate to the encoder you want, and press Enter.
▪
To disconnect from an encoder, use the arrow keys to navigate
to the encoder you want to disconnect from, and press D.
Connecting directly to an encoder with a point-to-point
connection
If your decoder and encoder are linked directly, instead of through
a network switch, you can open a point-to-point connection.
In the
Home
menu, press F > P.
