44
11.2 Layout Aids
To help the user construct layouts a number of extra support has been added to the
software. The
Zoom All
button sizes the layout screen to show all placed outputs. The
Centre Layout Origin
places the 0,0 point in the center of the screen, where new outputs
are placed.
11.2.1 Layout Grid
For regular positioned displays a layout grid option is provided for the user. By clicking on
the grid button on the layout screen a pop up appears permitting the user to set horizontal
and vertical step sizes and a rotation angle for a grid. A displacement offset is also
available but is only of use for producing an absolute grid pattern for some advanced
operations.
The values in the grid popup can be adjusted and when the apply button is pressed all
outputs on the layout will move to the new center positions if the Enable Grid is ticked.
Once the user is happy with the positions, then press OK to close the pop up.
The user
must press Take to send the new positions to the unit.
