3
1
Disclaimer
This product is intended for professional use. This product is not intended for use
in a medical environment and does not have the required certifications for such
use. Similarly, use aboard any aircraft or spacecraft while in flight or as an
adjunct to any surface, airborne or marine navigation system or any offshore
marine activity, including control of any watercraft, or any use similar to those
specifically herein mentioned is prohibited. Use in the aforementioned
circumstances would require additional testing and certification.
You have not become the owner of any software - you have merely purchased
the right to use the software. You may make one copy of the software for your
own use. Other copies will be deemed a breach of copyright.
No warranty is made either expressed or implied including but not limited to any
implied warranties of merchantability or fitness for a particular purpose. In no
event shall the supplier or manufacturer of this product be liable for errors found
within, or be liable for any direct, indirect or consequential damages or loss in
connection with the purchase or use of this hardware, software or manual. The
sole and exclusive liability to the supplier and manufacturer regardless of the
form of action shall not exceed the replacement cost of the materials described
herein.
By using this equipment you have indicated that you have agreed to the terms
listed above. If you do not wish to agree or the above terms are contrary to your
conditions of purchase you may return the equipment, unused, to your supplier.
All trademarks and copyrights are acknowledged. E&OE.
1.1
Regulatory Agency Acceptance
European ‘CE’ Mark Statement
Emissions: EN 55103-1:2009 Environment E1, E2, E3, E4 (50Hz to 50KHz)
EN 55103-1:2009 Environment E4 (Radiated Disturbance)
EN 55103-1:1996 Environment E4 (Conducted Disturbance)
Immunity:
EN 55103-2:2009 Environment E1, E2, E3, E4
(Generic Immunity Standard for Residential, Commercial and Light Industrial)
Low Voltage Safety (AC inlet units): EN 60065:2002 A1:2006 + A11:2008
1.2
FCC Statement
Class A Device: This equipment has been tested and found to comply with the
limits for a Class A digital device pursuant to Part 15:2009 of the FCC Rules.
These limits are designed to provide a reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the Instruction Manual, may cause harmful
