8
4.0 CONNECTING THE HARDWARE
Please study the panel drawings below and become familiar with the signal input,
outputs, power requirements/inputs plus any controls present.
Note: Each product has somewhat different capabilities and therefore different
cable connections are present. Locate the drawing for the item(s) you have
purchased and become familiar with the connectors used in that product.
Note: The resolution capability of the remotely located display devices must be
capable of displaying the output of the PC. Before connecting the CAT 5
extender system, verify that the display device can accept the PC output by
connecting it directly to the PC.
4.1 1T-VGA-CAT Transmitter and Receiver
1T-VGA-CAT
: Connect the PC’s display output to the VGA IN connector on the
transmitter. Connect a CAT 5 cable’s RJ-45 connector to the CAT 5 RJ-45 receptacle
on the Transmitter module. At the remote end (no more than 580 feet away for this
product), connect the other end of the CAT 5 cable to the Receiver’s RJ-45
receptacle then connect the remote display to the VGA OUT connector on the
receiver. Connect the supplied AC adapters first to the respective transmitter and
receiver and then to the AC sockets. Lastly, turn on the PC and displays. The PC’s
VGA output should now appear on the remotely located display device.
