15
5.2 1T-RGB-DELAY Adjustments
6.0 TROUBLESHOOTING
Other than faulty cables or attempting to use the product over too great a path,
there are seldom problems with the CAT 5 VGA Extender products.
If there is no image present at the remote location, connect the display device
directly to the PC to make certain that the problem is not in the display. If an
image is present under those circumstances, make certain the transmitter and
receiver(s) are receiving power. Next make certain your CAT.5 cable is defect
free and the RJ-45 connectors are securely attached to the cable at both ends.
After trying the above suggestions should the problem still persist, contact your
dealer for additional suggestions before contacting TV One. Should the dealer’s
technical personnel be unable to assist you, contact TV One via our support
website:
http://tvone.crmdesk.com.
Create a technical support request on the
site and our support team will respond within a short period of time.
VGA images transmitted over CAT 5 paths of more than 250 feet can sometimes
arrive at the destination with the individual RGB pictures no longer in registration.
The 1T-RGB-DELAY product allows delays to be introduced as required into the
signal path to cause the image at the remote location to be displayed correctly. Using
the buttons with the UP and DOWN arrows, the Red, Green and Blue channels are
adjusted as required to provide a corrected signal. Once set, no further adjustment is
required unless the cable length or actual cable is changed.
