Wi-Fi Curtain Module
QS-WIFI-C01
Mounting Clip
INSTRUCTION MANUAL
Reset Key
EMC Standard (EMC)
EN 300 328 V2.1.1 (2016-11),
EN 301489-1 V2.1.1 (2017-02),
EN 301489-17 V3.1.1 (2017-02),
EN 62311: 2008, EN 61000-6-1:2007,
EN 61000-6-3:2007+A1:2011
Safety Standard (LVD)
IEC 60669-2-1:2002/AMD1:2008/
AMD2:2015, IEC 60669-1:1998/
AMD1:1999/AMD2:2006,
EN 60669-2-1:2004+A1: 2009+ A2:2010,
EN 60669-1:2018
RoHS Standard (RoHS)
2011/65/EU, (EU) 2015/
86
3
Radio Equipment (RED)
ETSI EN 300 328 V2.1.1 (2016-11)
TECHNICAL SPECIFICATIONS
Product type
Wi-Fi Curtain Module
Voltage
220-240V AC 50/60Hz
Current
3A
WiFi frequency
2.4GHz - 2.4835GHz WIFI
Operation temp.
-10 C - +40 C
Case temp.
Tc: +80 C (Max.)
Operation range
≤ 200 m
Dims (WxDxH)
46x46x18mm(without clip)
IP rating
IP20
Warranty
3 years
3. Keep the device away from water , damp or hot
environment.
4. Install the device away from strong signal sources
such as mic rowave oven that may cause signal
interruption resulted to abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
FAQ
Q1: What should I do if I can’t con gure the Curtain
module?
a. Please check whether device is powered on.
b. Make sure your mobile and Curtain module
are under the same 2.4 Ghz WIFI network.
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: Which products can I control with the device?
Q3: What happens if the WIFI goes off?
Curtain,shutter, blind.....
You can still control the device connected the Curtain
module with your traditional Curtain and once WIFI is
active again the device connected to module will
connect automatically to your WIFI network.
Q4: What should I do if I change the WIFI network or
change the password?
You can connect the module to the WIFI network
according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 5 times or press the reset key for
about 10 seconds until the beeper on the module sound
continuously.
with mounting clip
without mounting clip
50mm
46mm
22.5mm
18mm
46mm
46mm
Wiring Instructions and Diagrams
1.Turn off the power supply before carrying out any
electrical installation work.
2.
Connect wires according to the wiring diagram.
3. Insert the module into the junction box.
4. Connect the power supply and follow
Curtain
module
con guration instructions.
Notes: Take your smartphone close to the
Curtain
sure you have min. 50% Wi-Fi signal.
Global international operation Whenever & Whe
rever
You are,All-in-one Mobile App
Anywhere
APP
APP
Voice control-work
with google home
Voice control-work
with Amazon Alexa
Device Sharing
Apps
APP
Router
Voice control
Curtain Switch
Inhouse local operation
N
L
L N
M
Scan the QR code to download Tuya Smart App, or
you can also search keyword “Tuya Smart” at App
Store or Googleplay to download App.
IOS APP / Android APP
APP USER MANUAL
INSTALLATION
Warnings:
1.
electrician in accordance with local regulations.
2. Keep the device out of reach of children.
MANUAL OVERRIDE
The
Curtain
module terminal reserves the access of
manual override function for the end-user to switch on/off.
· If you have connected the wall push-button, check
its work. Single pressing ofthe "down" button / "up"
button, will cause that the roller shutters moves in
the desired direction to the end position. If the ele-
ctric shutter goes in the opposite direction to the
expected,select "motor reversal" in the "More"op-
tion. When the electric shutter is moving up, press-
ing "up" button switches causes that the shutter
will stop immediately; when the electric shutter is
moving down, pressing "down" button switches
causes that the shutter will stop immediately.
Notes:
1) Both the adjustment on App and
Curtain
can overwrite
each other, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.