Page 59
Caution!
After setting time and date, turn the autoclave off and then on
again.
6.4
Logging in and entering the Main menu
Below you can find instructions how to login and enter the Main menu.
Section 6.1 above explains how to browse through the menus, section
6.2 explains how to change a parameter.
When the autoclave is on and no cycle is running, press the up and
down keys simultaneously to enter the
Quick Options
screen (see
6.3). On this screen you can either proceed to login (see below) or
choose one of the quick options available without login. To login as
user:
1.
On the Quick Options screen, choose login.
Select user screen appears.
Summary of Contents for LabSci 11-V
