Tuttnauer ELARA11-D, Technicial Manual

Page: 123 / 176

Page 122
6. Replace the damaged pump with a new pump.
7. Reconnect wiring and piping.
8. Reassemble the outer cover.
9. Turn on the autoclave and verify it operates correctly.
No. Description Cat. No.
1 Rubber shock absorber SKR203-0006
2 Fitting 5/16”x1/8” (straight)

3 Screw
BOL191-0140
4 Nut
NUT192-0191
5 washer NUT193-0250
6 Spring washer NUT193-0315
10.32
Replacing the Plunger or Coil of the Solenoid Valve
The solenoid valves may be out of order due to faulty plunger or coil. To repair
the solenoid valve
– replace the faulty plunger or solenoid
Caution!
Before starting, disconnect the instrument from the power source and
ensure that there is no pressure in the chamber or coil.
Allow the autoclave to cool before removing outer covers.
1. Open the outer housing to reveal the faulty solenoid valve.
2. Unscrew and remove nut (1).
3. Remove the coil (2).
4. Unscrew the plunger + spring (4) with the plunger housing (3) and
replace it with a new one. The plunger the spring and the housing are
replaced as a kit.
1
2
1
3
www.shanghaidelan.com 021-54263653