9
Disposal according to electronic scrap ordinance
This side up (during transport and shipment)
Fragile (during transport and shipment)
OR
A warning or precaution as detailed in the Operation and
Maintenance Manual (User Manual)
OR
Caution! Hot Surface
Table 1 - Device labeling
General Description of the Device
The autoclave is fully automatic (a computerized control unit ensures a fully
automatic sterilization cycle, control and monitoring of physical parameters and
a clear documentation of the sterilization cycle. Drying is performed with the
door closed)
This autoclave uses steam as a sterilizing agent.
The steam is produced by warming up a controlled amount of water inserted to
a pipe heating element, and then to the chamber. This technique saves energy
and water consumption.
The autoclave is equipped with a Pipe heating element and with chamber
heaters to maintain the steam inside the chamber.