77
Connecting the interface cables to the printer
1. Connect the adapter male (1) to the RC-232 Output Port blue cable female plug
connection (2), tighten and secure the 2 screws (3) to the adapter.
2. Plug the adapter connected with the blue cable (8) to the printer adapter connection,
Tighten the 2 screws (4). To the printer (5) using screwdriver shown below.
3. Connect the Power cable (6) to the printer back port.
1. Adapter
2. RC-232 Output Port blue cable
3. RC-232 Output Port screws
4. Adapter 2 screws
5. Printer
6. Power cable
4. Connect the power cable connector of cable (6) coming from the printer to the electrical
power source on the wall.
1
2
3
4
5
1
6
7
Figure 5
Connecting the interface cables.
8
6