75
Loading thermal printer paper roll/ Label roll
You can either load a thermal paper roll, or label roll on the printer
roll
compartment opening.
You can also connect two printers to the autoclave, one loaded with thermal
paper roll, and the second printer loaded with label roll.
1. Slide switch (item 1) forward shown in fig 2, it will allow to move the roll holders (2)
apart as shown in fig 1 below, allowing to put the paper roll on the holders.
2. Adjust the roll holder (2) as shown in (item 3) in figure 3 depending if a thermal or label roll
is installed.
3. Place the thermal paper roll or label paper roll as shown in (item 4) figure 3.or,
4. Place the label roll as shown in (item 5) figure 4.
1
2
Figure 2
