10
The autoclave is equipped with a vacuum system, which supports and
improves:
Removal of residual air from packs and porous load and most kinds of
tubes (rubber, plastic etc.) by vacuum at the first stage of the cycle.
Steam penetration into the load; resulting in effective sterilization.
Temperature uniformity.
Post sterilization drying phase
A touchscreen is used for monitoring and control purposes.
The device has a built -in USB port to enable the operation of an external
optional barcode printer:
The barcode printer can print labels with a unique cycle ID barcode,
operator name, sterilization and expiry dates
One barcode printer can be connected to the machine.
The printer connection to the machine, by using a USB socket, with a
dedicated cable.
Barcode printer power supply voltage can range between 100-240V.
A barcode printer is an optional addition to the autoclave
The device features built-in memory to record up to 999 sterilization cycles.
These can be exported to a USB device to be transferred to a PC.
The device has a built-
in Network Port for use with optional Tuttnauer’s R.PC.R
software when connected to your local network.
The autoclave has two optional configurations (available upon request):
Basic: Demineralized water is supplied by a manually filled reservoir,
demineralized water overflow outlet on the rear cover (device catalog
number: AMS10-230-T)
Automatic (optional): Demineralized water direct inlet from the water
supply system, demineralized water overflow, and waste water outlet
on the rear cover (device catalog number: AMS10-230-W-T)
Intended Use
The T-edge10 Table-top autoclave is designed for sterilization of medical and
surgical goods such as wrapped and unwrapped solid, hollow, and porous
loads used in dental and medical clinics, first aid rooms, hospitals, and
laboratories etc.
